Things To Know About Dado Blade

Whether you are a professional furniture maker or a beginner, there are tools to help you out. A dado blade is a tool used by woodworkers to saw and cut wood. A set of dado blades will help you shorten the time to complete the job and consume less effort. However, do you really understand it as well as how to choose a good dado blade? If not then this article is all you are looking for. Here, we will suggest a few things to keep in mind when choosing a dado blade. Do not skip this article.

I. Types of Dado Blade

A dado cutter is the first choice for cutting joints. It helps to improve working efficiency for projects. You can easily order a dado blade kit at any hardware store or website. However, it can be difficult to be sure that what you buy will be right for your project. Therefore, to avoid causing a waste of money, you should consult the information carefully before opening your wallet. The first and foremost thing when choosing a dado blade is the type. The dado blade is usually divided into two main categories, each with its own pros and cons:

1. Stacked Dado Set

  • Used by most woodworkers for its versatility
  • Consists of two outer blades, 4 to 6 hash knives.
  • Cut width can be adjusted based on the number of hashes.
  • High precision. The smart design increases cutting accuracy and perfect groove.
  • High strength. Not as easily corroded as wobbly blades.
  • Long service life. No need to re-sharpen many times. No need to replace it as often.

However, the stacked dado set also has the disadvantage of being quite expensive and difficult to set up. Despite its many benefits, the inclusion of multiple blades is the reason it sets it apart from the others. In addition, while it can increase efficiency, speed, and accuracy when working, it is quite difficult to install, especially for those who do not have much experience.

2. Wobble Dado Blade

  • Consists of one blade instead of multiple stacked blades like the Stacked Dado Set.
  • It uses a different technique for grooving wood surfaces.
  • Affordable due to including only one blade. Diverse brands.
  • Installation is quick and easy.
  • Suitable for professional and amateur furniture makers.

However, this type of dado blade has lower accuracy. It is difficult to achieve a good square groove and a flat bottom. In addition, their design also causes a lot of vibrations, causing the screws to loosen, which eventually leads to damage to the saw.

II. Guide to Buying the Dado Blade Set

A set of dado blades is an indispensable tool for every woodworker. Most professional craftsmen know how to choose a good dado blade set. However, for those who are just starting out, this is not an easy thing. Therefore, here are a few pointers for you.

1. Blade type

As mentioned above, the dado blade consists of 2 main types: Wobble Dado Blade and Stacked Dado Set. Each type has its own design to suit each certain project. Therefore, the first thing to do is to determine the right dado blade type you need.

Stacked dado sets are often recommended by many woodworkers because they are more precise, the joints have the perfect fit. However, if your budget is not large, the Wobble dado blade is also a good choice.

2. Compatibility

Dado blades do not have as many variations as most other saw blades. Therefore, the deviation between the instruments will be less. However, there are few but not impossible mistakes. It is essential that you choose the dado blades with the correct specifications for the saw.

Specifications: The dado blades usually have 0-degree angles to suit table saws. However, some other saw blades have hook angles from -12 degrees and -5 degrees.

Diameter and capacity: Most dado blades will be 6 or 8 inches in diameter. The 8-inch blade gives deeper cuts, so it is suitable for larger power saws. The 6-inch dado blade set is suitable for contractor saws, cabinet saws, hand saws, and table saws.

3. Materials

Besides the above factors, the material is also a factor that cannot be ignored. The materials used to make the dado blade determine its lifespan. Therefore, to ensure work efficiency, your dado blade needs to be made from durable materials with good rust resistance. In addition, they are also subject to impact, extreme weather, etc. Using poor quality dado blades will interrupt your project, even causing dangerous accidents. Typically, dado blades made of aluminum or alloy steel are more commonly used.

4. Price

As shoppers, we certainly like to buy cheap products. However, the money you spend will be proportional to the quality of the product. The good dado blades often come from well-known brands with high prices; but instead, you will have more efficient and safe experiences. And you also won’t need to worry about regular maintenance or replacement of the dado blade. On the other hand, if your budget doesn’t allow it, consider cheap products before you buy them.

Final Word

A dado blade is a useful tool, but not all types are of great use in your project. That is the reason why you need a better dado blade rather than a good dado blade. Hope the above guidelines will help you find a product you like the best. In addition, you can also consult more information from the salesperson or other customers to increase the accuracy of your decision. Thanks for reading.

Best Dust Extractor Vacuum: Buying Guide

Whether it’s at home, or at the factory, dust is inevitable. They can be harmful to your health so cleaning out dust is important to keep the living space clean. However, regular cleaning is too strenuous, annoying and time-consuming, especially for busy people. That is why you need a powerful partner to help you remove all the dirt in the house effectively. And a dust extractor vacuum is exactly what you need to look for.

With a unique and modern design, they will help return the cleanliness of your living space. However, in order to get the most out of the machine, you should learn a little bit about their different features. And to make it easier to choose, we will suggest a few ways to find the best dust extractor vacuum for your space. Do not ignore the following information.

1. Depending on the needs of use:

Although there are many types of dust extractors to choose from, each one is designed to meet different needs. Therefore, before buying a vacuum cleaner, determine exactly what you need to use. The specifications should be appropriate for the task it will undertake. For example:

  • DIY tasks and small workshops: You will need a machine with a suction power of 12-19 kPa, capacity from 15 to 20 liters. It would be better if you choose a product with high strength such as a plastic barrel model or a stainless steel tank. In addition, the included accessories such as a brush head, flat nozzle, and extension wand are also important. The power outlet can also be seen as an advantage if you are using it with another tool.
  • Worksites: This site requires dust extractor vacuums that are powerful, fast, and efficient at work. Machines with capacities from 1,600 to 1,800 W; suction capacity from 19 to 25 kPa, stainless steel tank, tube about 8 to 11 meters long will be the ideal choice for you. In addition, modern features like automatic filter cleaning, sensors, blowers, and power outlets are also essential. And a quiet machine will be better suited to your workspace.
  • Industrial use: The vacuum cleaner has a rotating brush head that allows sweeping and suctioning of debris at the same time. This is ideal for projects in industrial or large commercial buildings. Therefore, you should choose machines with a starting capacity of 1,600 W, an airflow rate of at least 300 liters/min.

In addition to its intended use, the quality of the dust extractor vacuum depends on the durability of the material and the brand of its manufacture. In addition, it depends a lot on the frequency of your use.

2. Features to consider:

Just like any other tool, before buying a dust extractor vacuum, you should consider the main features of each product. Here are a few features you should be interested in:

Power consumption (unit: Watts): is the energy consumption of the machine. A large vacuum cleaner usually consumes a lot of power. This makes your electricity bill thicker. Therefore, choose machines with the right capacity for the space you use.

Air flow per minute (unit: L / min): is understood as the volume of air that the machine will suck in. The larger the volume, the shorter your working time will be.

Vacuum pressure (unit: kPa – kilo-Pascals): The higher the suction power, the higher the vacuum pressure will be. It is better if you choose vacuum cleaners with a large surface area, high filter quality to clean the air more easily.

The size of the filter (unit: liter): If you often have to vacuum or use it for large projects, choose machines with large capacity. Small machines limit your working speed.

Weight (unit: kg): A machine too heavy is definitely something no one wants if you have to carry it with you. Most of the people using the vacuum cleaner are women, so compact, lightweight machines are a perfect choice.

Noise level (unit: dB): To comfortably use the vacuum cleaner anywhere, whether at home or in the workshop, you should check if it is making too much noise. In addition, if you are sensitive to noise, wear ear protection every time you use it.

Length of hoses and power cord: For spaces with great travel range, make sure your hoses are long enough to reach it.

The battery voltage and amperage should also be considered. The capacity and time of use of the machine depend on this factor. It would be inconvenient if the machine automatically disconnects when in use, right?

3. Accessories included

A conventional vacuum cleaner is generally enough to meet your cleaning needs. However, to perform many other tasks, you also need to prepare a few other accessories included, such as: Brush heads (rectangular or triangular), flat nozzles, wet and dry nozzles, extension wands, variable-length hoses, and accessory holder.

However, more recent modern vacuums will come with additional accessories to fulfill specific purposes.

Conclusion

The choice of a dust extractor vacuum depends on ensuring compatibility between your cleaning specifications and needs. Choose materials with high durability such as high-quality plastic, stainless aluminum, etc. to make sure you can use it for as long as possible. In addition, price is also a very important factor. Balance your spending carefully if your wallet is not too thick. Above are some suggestions to help you find a good dust extractor vacuum for your cleaning work. Hopefully, the dust particles will not be your worry anymore. Thanks for reading.

Safety tips when using log splitters

How to use log splitters most securely is still a question of many users. In today’s article, I would like to share with you some useful tips on using a log splitter safely.

Here are some tips that you should follow while using the log splitter to prevent any injuries to your fingers, like crushing them or cutting themselves.

  • Know the type of wood: Be careful when putting records in the log splitter because every kind of log will work differently when it is split into different types of log splitters. You place the wood by holding it on the sides and not keeping it at the end. Remember that wood has cracks, so you don’t divide evenly or break into large chunks.
  • Be wary of using log splitters: Like any machine that uses a cutting edge, you must always be alert. If you feel that the person is not alert and tired then absolutely should not use the log splitter right now, stop immediately. In particular, you should never lay your hand on the log while it is being separated to prevent any mishap.
  • Coordinate with assistants or helpers: You must synchronize with your team or assistants when operating the machine to prevent any unforeseen accidents that may occur when you use the log splitter.
  • Maintain distance: Make sure you only turn on the device when the support person is at least 10 feet away from the machine. Also, maintaining a safe distance is always recommended in the user manual to protect your safety and those around you.
  • Preventing back pain: Working with log splitter has several issues that affect your back. Continuous lifting and placing such records will lead to back pain. Therefore, take enough rest to relax after a while at work and perform the necessary movements to reduce stress for yourself. The best way is that you choose a space and location where you can adjust the height so you can set the log splitter to conduct you comfortably without stress.
  • Wear suitable clothing: It is also essential that you wear the right clothes and protective gear while working with log splitters. Wear goggles and gloves to prevent splinters from getting into your eyes and poking your hands. Also, you need to wear non-slip shoes, preferably covered shoes or specialized shoes for the work with potential dangers.
  • Avoid poisoning: You are likely to be poisoned by hydraulic fluids released from a hydraulic log splitter due to the high pressure developed inside it during use. This liquid is very toxic and can cause blood poisoning, gangrene, and even death. Therefore, you should pay special attention to avoid direct contact with that liquid.
  • Follow the instructions in the user manual: Do not ignore the safety instructions in the manual that came with the log splitter before assembling and operating it. All safety regulations will be outlined there. The instructions in the user guide will also guide you to use the log splitter correctly and solve any problems that may arise. This will ensure that your device has no issues and any warranty issues with your device.
  • Know all the Controls: Before you start using the log splitter, you must be fully aware and know all the controls and switches on the machine. And the most important thing is that you need to know how to stop and hang up.
  • No children: Do not allow children to approach the device. The log splitter is not a toy. Children under the age of 16 are not allowed to use these log splitters.
  • Maintain distance: You must ask to keep your children and pets at least 20 feet from log splitters.
  • Place the device on flat ground: Place the machine on a horizontal surface and lock the device, so it does not move. You do not place the log splitter on any uneven, slippery surfaces. These surfaces will make the machine unstable, and this will affect the quality of the splitting and may even cause injury to the operator.
  • Right lighting conditions: You should only use the log splitter in the right lighting conditions such as daylight or under bright artificial lighting. You do not operate the machine at night or in poorly lit areas to prevent accidental mishaps.
  • Do not use the appliance for any purpose other than splitting wood.
  • Never let the log splitter run without supervision.
  • Remove log splitter once you are finished to prevent any trips and unexpected falls.
  • Your safety is your responsibility; do not ignore it.

The design enabled second hand

When we talk about safety issues, it’s only natural that we talk about Split Second’s two-hand activation design, making sure that both of your hands are far away from the stand, gears, and the log.

Typically, woodcutter holds one hand on the log and the other on the splitter to direct the log splitter to cut and also to prevent any unwanted debris from reaching them.

The Second Split is precisely designed to avoid this habit. The wedge in a snap is placed at an angle of 45 degrees to ensure the wood is not separated and tilted to one side. This also prevents any wrong pieces coming your way. Therefore, users do not need to hold hands on the wood to avoid pinches, cuts, and other unnecessary accidents.

In conclusion

Set the log splitters you need to use before choosing to buy them. Then decide on which log splitter is best rated for your needs, budget, and other criteria. In particular, consider the pros and cons of all the models and types of log splitters to use before making a decision. And keep in mind the things about safety when using the log splitter, I just shared for you above. They will help you a lot in the process of operating and using the best log splitter you have.

One Chair Down, One To Go

As you can see by the title, I finally have a chair done!

If there ever was a moment for me to have my very own orchestra, now is it.

I bought these chairs from Goodwill, oh, I don’t know, about FIVE MONTHS AGO.  For $12.00 each, kids.

Q:  Seriously, does re-upholstering a couple of chairs really take that long?

A:  It does when you have no idea what you’re doing!

Here’s what I started with…

It might be hard to tell, but that is actually pink, striped crushed velvet…and, underneath that layer, was some lime green crushed velvet.  Surprise!

And, here’s the first chair, all done…

How do you like them buttons?? I was under the impression that would be the most difficult part of this project…

Yeah, right.

I did about 100 things wrong while upholstering this chair, and decided to fix about 50 of them.  I’m worried the next chair is going to look so much better because I actually kind of get it now.

Kind of.

I hope that as I’m working on the second chair, I can get more photos of the steps I take, and present it to you in more of a ‘How To’ (or maybe ‘How NOT To’) format.

In the meantime, if you have any tips, suggestions, or even questions, please, please comment! Nothing makes me happier than to hear from you!

Pallet Coffee Table

We purchased our new construction home two months ago, and I’m in the process of trying to blend my industrial/rustic style with my husbands ultra-modern/black plastic style (Read: I’m trying to make sure there is NO modern, black, plastic-y stuff in our house).  One of the things I really wanted was a large coffee table, but I didn’t want the expense.  I started searching the internet and came across a ton of really cool pallet table ideas, and so began the search for some FREE pallets.  First, I asked my husband.  “Sure,” he says, “I can get you some pallets.”  A month later, and still no pallets.  I asked a friend if her husband could get some pallets for me.  “Yeah!” She says, “My husband has a ton of pallets at work.  He can get you some!”  A month later, and still no pallets.  Think, think, think…got it! I’m a genius (in a sing song voice)!! I put on my skinny jeans and asked some guys at our construction site for a couple of pallets.  “Sure,” they say, “Take as many as you need!”  Apparently, my skinny jeans weren’t doing the trick, because they didn’t carry them home for me.

The pallets were pretty beat up, so first I had to sand them…and then I had to sand them some more:

After I finished sanding, and cleaning, I started staining them.  Our couch right now is dark brown, so I wanted to make sure that the wood wasn’t too dark.  I went with Minwax Wood Finish, Early American 230:

I have to admit, this was my first time staining wood! It was so easy! Much easier than painting, I think.  Well, honestly, I haven’t painted much.  So, painting may not be so difficult, either.

I’m now in the process of putting a top coat on the wood and painting my brackets and caster wheels.  Stay tuned for the finished product in the next few days!

Pallet Coffee Table: Part 2

I did it! I was able to finish my pallet coffee table in time for Thanksgiving, and I have to say, it’s an amazing coffee table! It was a lot of work, but so worth it.

I had a really hard time figuring out how to attach the top of the table to the bottom, and finally came to a solution, using elbow brackets.  I wish now that I had spray painted them to match the rest of the hardware on the table, but you can’t actually see the brackets unless you lay on the ground, so I won’t worry about it too much.

I have some ideas about hardware on the outside of the table, just to give it a more industrial vibe.  We’ll see how that plays out.  I added an extra 2 x 4 in between the pallets, to give it some extra height, along with locking caster wheels.

I really can’t tell you how proud I am of this table! I have never made anything like this before, so to start a project like this and see it finished, is an incredible feeling.  Try it yourself, and let me know how it goes.

We’re headed out to the movies but I’ll be back tomorrow to show you our Christmas tree.  I’m trying to convince my husband to let me change up all of our typical holiday decorations.  We’ll see if I’m successful…

Lamp Re-Vamp

I have to admit, the title of my post made me giggle.

On Sunday, my husband took down the chandelier in what is supposed to be our formal dining room, but we’re using it as a sitting area because it connects directly to the living room.  It came with our house and was brushed silver.

After brushing it with some steel wool, and spraying it with primer, I decided to paint it the same color as the hardware on my pallet coffee table.

I also purchased some Edison light bulbs to give the chandelier an antique-y vibe.  I think it still looks like a pretty modern, semi-industrial chandelier.

The light coming from the Edison bulbs is so much warmer than the light from a fluorescent bulb.  Much prettier for photography!

I also got a table lamp that was white ceramic from Marshall’s a few months ago, but the desk and bookcases in our office are white right now, so I decided to give the lamp a little boost.  I totally forgot to take a picture of the original lamp, but imagine it shiny and white.

 

The light coming from the Edison bulbs is so much warmer than the light from a fluorescent bulb.  Much prettier for photography!

I also got a table lamp that was white ceramic from Marshall’s a few months ago, but the desk and bookcases in our office are white right now, so I decided to give the lamp a little boost.  I totally forgot to take a picture of the original lamp, but imagine it shiny and white.

I love how bold the blue is, and this paint dried really quick! I don’t think it’s actually intended for ceramic, so we’ll see how well it holds up.  I decided that I don’t like the shade that’s currently on the lamp, so I’ll be hunting for something new.

……………………………………………..

For those of you who follow me on Facebook, you know that yesterday I made an outstanding purchase at Goodwill.

These chairs were only $12.00 each!! I’m putting these chairs in my project line up and hopefully I’ll get them started sooner than I have the drapes.  I’m pretty sure that parts of the chair are not actually wood, but maybe some type of resin? Oh well! I’m too happy to have found a style of chair that I like for so cheap!

I found my fabric for the back panel of the chair.  For the front of the chair and the cushion, I’m going to use drop cloths, which are kind of a light oatmeal color.

What do you think? My drapes are (eventually going to be) white with a blue Marrakech trellis pattern.  I hope it all works together! I’ve really tried to just go with what I like and make it work, and so far, so good.  I hope I can keep that ball rolling.

……………………………………………..

I’ve decided that for 2014 I’d like to do a photo a week project and I’d love it if you all would join me.  I’ll have a post coming tomorrow with the weekly photos to be taken and how it will all work.